BluCop reminds you in time

Did your child loose his favorite toy on the playground?
Did you ever arrive to the talks without the contract?
Did you leave it on your desk prepared?

BluCop can remind you when you leave.
In order to configure the notification you will need an additional small bluetooth device, preferably a cheap headset. The headset has to be registered at BluCop (see the steps at the bottom) and bond to the thing that you must carry with you. You need to turn on the headset, start BluCop and configure guarding in order to get notified if you forget to bring the guarded object with you. Once its done BluCop will warn you whenever you get too far from the guarded object, provided that you took your mobile that runs BluCop.

Bind Bluetooth headset to a folder

1. The tools you need

2. Punch a hole on the folder
The position of the hole determines the position of the headset.

3. Make a short cut downwards at the bottom of the hole

4. The cut is shorter than an inch

5. Button up the headset

Inside view close-up

Discreet appearance

The small flashing light does not mean that BluCop watches the device, do not forget to start BluCop and configure guarding

Register a Bluetooth headset marker at BluCop

  1. Start BluCop on your mobile
  2. Make your headset discoverable

    1. Turn off your Bluetooth headset

    2. Press the button on your headset

    3. Keep it pressed until the light becomes continuous

    4. Release the button
  3. Select the Add New Marker menu item of BluCop
  4. Select your Bluetooth headset in the list of found devices and add it to the marker list by choosing the Add action

Important: DO NOT CONNECT ANY MOBILE WITH THE HEADSET THAT YOU USE AS A MARKER, otherwise you will receive false alarms. If the headset is already paired then you can disconnect and/or disable it through the menu system of your mobile without turning off the Bluetooth module of the BluCop device.