BluCop becomes a bodyguard

Did he walk away and got lost while you were looking at the shopwindow?
Were you selecting foods in the supermarket when she disappeared in the crowd?

Don't panic, BluCop can notify you to watch out when your child gets too far.
In order to configure the notification you will need an additional bluetooth device, either a cheap headset or a mobile phone that will be with your child.

How to turn BluCop into an attendant

  1. Register your marker at BluCop if it has not been registered, yet
    You can find registration instructions at the bottom of this page for mobile phone and headset markers
  2. Ensure that the marker is turned on, its Bluetooth is enabled and will be with your child

    A small light blinks regularly, when the headset marker is reachable over Bluetooth

    The Bluetooth icon is shown on the screen of your mobile marker, when it is ready to communicate with BluCop over Bluetooth

    Put the marker into the pocket of your child then zip the pocket

    Put the marker into the baby carriage
  3. Configure BluCop to guard your child:
    1. Start BluCop on your mobile
    2. arm the marker by opening the markers property page and checking in the Guard marker checkbox
    3. start guarding by selecting Start/Stop Guarding

Register a mobile phone marker at BluCop

  1. Start BluCop on your mobile
  2. Turn on the Bluetooth module of your mobile phone marker
  3. Make your mobile phone marker visible to other Bluetooth devices by setting the Bluetooth visibility option on the marker properly
  4. Select the Add New Marker menu item of BluCop
    Note: finding the marker may take a minute so be patient here
  5. Select your mobile phone marker in the list of found devices and add it to the marker list by choosing the Add action

Register a Bluetooth headset marker at BluCop

  1. Start BluCop on your mobile
  2. Make your headset discoverable

    1. Turn off your Bluetooth headset

    2. Press the button on your headset

    3. Keep it pressed until the light becomes continuous

    4. Release the button
  3. Select the Add New Marker menu item of BluCop
  4. Select your Bluetooth headset in the list of found devices and add it to the marker list by choosing the Add action

Important: DO NOT CONNECT ANY MOBILE WITH THE HEADSET THAT YOU USE AS A MARKER, otherwise you will receive false alarms. If the headset is already paired then you can disconnect and/or disable it through the menu system of your mobile without turning off the Bluetooth module of the BluCop device.